=> REL – T-9 10″ Powered Subwoofer High Gloss White

REL – T-9 10″ Powered Subwoofer High Gloss White

  • Power rating: 300W (RMS) class AB amplifier
  • Input impedance: 150k ohms (high level) / 10k ohms (low level)
  • Woofer: 10″ long-throw woofer / 10″ passive radiator
  • Fully electronic SET-SAFE
  • Low-end frequency response: 28Hz @ -6dB in room

REL – T-9 10″ Powered Subwoofer High Gloss White

Product Description

Stepping up to a T-9 produces a huge increase in performance over the smaller, less expensive down-firing models (T-zero/T-5).
T-9 combines a forward-firing 10″ passive with a down-firing 10″ ULT driver, along with a high current 300W Class A/B amp with remote-mounted toroidal transformer. The combination of a larger cabinet, the driven cone area of a 15″ driver, and 300 watts of power results in epic bass at a reasonable price.

T-9’s rear panel embodies classic REL quality. The very large heatsink that allows T-9 to run cool for years, a full REL connectivity suite that allows for both perfectly blended musical sub bass, as well as powerful, concussive Home theater bass defines the T-9. Very large soundfield reproduction mates with Full-sized tower speakers And quality monitors.

The amplifier design for T-9 is a high current 300W Class A/B linear power amplifier with remote mounted toroidal transformer. These workhorse amps have proven themselves in over 50,000 units to date, with excellent reliability.

T-9 uses a quality stamped steel-frame 10″ Ultra Long Throw (ULT) driver in the T-9. REL drivers are a big part of their success, with much care and attention paid to producing truly low bass from relatively small drivers, and then engineering them to be able to withstand high power and output for long periods of time. T-9 features a forward-firing 10″ coated paper passive for the driven surface area of a 15″ driver.

Specifications:
Comparison Specifications

Power rating: 300W (RMS) class AB amplifier
Input impedance: 150k ohms (high level) / 10k ohms (low level)
Woofer: 10″ long-throw woofer / 10″ passive radiator
Fully electronic SET-SAFE
Low-end frequency response: 28Hz @ -6dB in room
Cabinet design: Instrument-grade bracing with milled aluminum feet
Phase switch: 0° or 180°
Input voltage: 110/120V
Dimensional Specifications

Dimensions: 13″ x 14.7″ H x 13.78″ D
Weight: 39 lbs.